Apply the following steps to repair Wrong Software
When the binary file is uploaded on your phone if you turn your phone ON, then it will give an error as Wrong Software and switched OFF by itself. To repair this you need to use Siemens Logger and A3X Map Maker All Doer.

To Use Siemens Logger:


Click at Logger and choose your phone. Do not put your phone in the Sync Station yet. Click Read phone after approx 1 sec put your phone in the sync station (it must not turn on). Now it reads the log a new window appears with Old IMEI and New IMEI.

Now it reads the log a new window appears with Old IMEI and New IMEI. Ignore Old IMEI and write your IMEI at NEW IMEI, the last digit isn't needed. Now Click Ok and save the log (*.log).


Calculate Maps using A3X Map Maker All Doer:

Open the log file which you saved in the notepad and erase "Version 4.00" not "Log File." (There must not be a space after Log File.) and save the file. Now Click IMEI Change, then Open Log. Choose Log you saved and click Ok. The Data of the log is displayed, then save your map (*.map).

To Re-flash Map using Siemens Logger:

Start Logger 4.02 press write IMEI, and choose your phone type. Click Open map and choose your map which you saved. Click Write IMEI and approx 1 sec put your phone in the sync station (it must not turn ON) Finished!!! Keep the maps you can use it several times